Your cart is empty
Browse our catalog to find the parts you need.
These images are illustrative and may not match the product exactly. Always verify by part number — or confirm instantly with the assistant using a photo or VIN.
Neapco · Drivetrain
N729-3-1932X
In stock · ships from Knoxville
The Neapco N729-3-1932X is a 7290 series transmission slip yoke that connects the driveshaft to the transmission output shaft on Dodge/Chrysler vehicles.
Confirm the part fits before you buy. Applications and interchange numbers are researched and audited per part.
Verified fitment for 2 applications
Add your truck to see whether it's one of them
All confirmed applications for this part number.
Other applications
Other applications
May also fit other Chrysler transmissions with a 1.312-inch, 30-spline output shaft (e.g., A518, 45RFE, 47RH, 47RE, 545RFE, 65RFE). Output shaft has 30 splines; slip yoke has 29 splines and 1 wide space (blind spot). Verify output shaft spline count and diameter before ordering.
Part data verified against 5 catalog sources
Numbers this part supersedes or interchanges with. Showing 2 of 2.
Different year, make, or config? Get a confirmation against your truck in under a minute.
It allows the driveline to change length as the suspension moves, preventing binding. This yoke is designed for transmissions with a 1.312-inch diameter, 30-spline output shaft (29 splines plus one wide blind spot), commonly found on the TorqueFlite 727 automatic and A833 4-speed manual transmissions. It should be replaced if the splines are worn or the u-joint bearing surfaces are damaged, as failure can cause driveline vibration or loss of power.
Part Number: N729-3-1932X
7290 A13 33 4 SPEED TRANS.
Category: Driveline
Unit: ea
Dealer: Post Onsite
Compatibility, alternatives, and more
