Your cart is empty
Browse our catalog to find the parts you need.
These images are illustrative and may not match the product exactly. Always verify by part number — or confirm instantly with the assistant using a photo or VIN.
Spicer · Drivetrain
14-30-12-10800
In stock · ships from Knoxville
This is a Spicer 1000 series steel driveshaft tubing section, measuring 1.750 inches outside diameter with a 0.065-inch wall thickness (nominal ID 1.620 inches) and cut to a length of 108 inches (9 feet).
Confirm the part fits before you buy. Applications and interchange numbers are researched and audited per part.
Verified fitment for 1 applications
Add your truck to see whether it's one of them
All confirmed applications for this part number.
Other applications
Other applications
This is a raw tubing section. Specific vehicle fitment must be confirmed by the fabricator or installer based on driveline geometry, required length, and yoke/U-joint series. The 108-inch length may need to be trimmed to the exact required dimension.
Part data verified against 2 catalog sources
Numbers this part supersedes or interchanges with. Showing 2 of 2.
Different year, make, or config? Get a confirmation against your truck in under a minute.
It is a straight, welded steel tube used to fabricate or repair drive shafts for heavy-duty trucks, buses, and equipment. Because the tubing is subject to torque and vibration, it is replaced when bent, worn, rusted, or otherwise damaged. Note: This 108-inch tube is now obsolete and has been superseded by Spicer 14-30-12-10000, which comes in a 100-inch length.
Part Number: 14-30-12-10800
TUBE 1-3/4 X .065
Category: Driveline
Unit: ea
Dealer: Post Onsite
Compatibility, alternatives, and more
